 |
 |
|
 |
|
|
|
       |
 |
|
 |
|
We
have expertise in each of the following services. Click
on one to read more about it -
Diamond Core Drilling Method - Precision drilling for a clean cut hole from standard 10mm - 700mm diameters, non standard on request. Areas - All building concepts. Advantages - Dust free, Vibration Free, Quiet, Clean cut, Cost effective, Minimal making good.
Stitch Drilling Method - Series of overlapping core holes to create openings. Areas - Lift shafts, Stairways, Door openings. Advantages - Can be used in restricted areas, Abnormal shapes possible, Clean cut, Dust free, Vibration free, Quiet.
Investigative Coring Method - Extracting diamond drilled sample cores from hard materials be it man made or natural. Basic reports supplied and we can supply testing facilities by a NAMAS approved laboratory. Areas - Roads, Bridges, Tunnels, Constructions. Advantages - Provides an insight to preliminary information, Ascertain depths, material types, and thickness of outer and inner stone walls.
Pourable Grout Bursting Method - To break up large obstructions. Areas - Where access is restricted. Advantages - Broken into easily movable sections, Low noise, Vibration free.
Floor Chasing Method - Cutting two parallel lines to accommodate conduit piping. Areas - Large Supermarkets, Electrical outlets, Retail parks. Advantages - Uniformly concealed pipework, Relatively dust free, Vibration free, Cost effective, Minimal making good
Wall Chasing Method - Cutting two parallel lines up to a depth of 35mm to accommodate conduit piping. Areas - All building concepts. Advantages - Uniformly concealed pipework, Relatively dust free, Vibration free, Cost effective, Minimal making good
Anchor Installation Method - Precision drilling for a clean cut hole from standard 10mm - 700mm diameters, non standard on request. Areas - All building concepts. Advantages - Dust free, Vibration Free, Quiet, Clean cut, Cost effective, Minimal making good.
Floor Sawing Method - Using petrol and diesel saws with diamond blades that saw to cut horizontal flat surfaces. Areas - Factories/Warehouses, Pavement, Bridge Decks, Runways, Expansion Joints, Trenching Joints, Demolition Cuts. Advantages - Remove damaged concrete sections, Remove complete floors for demolition, Blade cuts at 40 metres per second, Can cut up to depths 650mm deep, Clean edges therefore minimal making good, Flexible where access is restricted, Electric saws are advantageous for areas which are environmentally sensitive to fumes, Minimal set up time, Own power unit, Fast cutting times.
Wall Sawing Method - The use of a diamond circular saw blade to mount onto a steep or vertical wall or similar to form precise cuts and dimensions. Developed especially for door and window openings in reinforced concrete walls. Areas - Stairwells, Floors, Lift shafts. Advantages - Accurate cuts, Cost effective, Easily dismantled to allow for access into restricted areas, Wet cutting, No dust.
Wire Sawing Method - Wire sawing is a relatively new concept where diamond wire is used to cut through concrete. The latest technology in wire sawing from Eurodima(UK) Ltd has outstripped the benefits from other wire saws available. Areas - Wide range of cutting tasks under different and difficult operating conditions. Advantages - Extremely fast cutting times as wire speeds run up to 30 metres/second, Low noise level 75DBA, Low overall weight (192Kg), Lower risk of accident - less wire breakage occurs due to the gentle operation of the pneumatic feed, Short set up time, every imaginable cut is possible, Machine automatically operates after set up and stops automatically when the wire storage is full, Dismantled for easy access to restricted areas.
Crunching Method - Using variable hydraulic jaw sizes to crunch reinforced concrete/rock. Areas - Shops, Offices, Banks, Factories and all other construction sites. Advantages - Silent operation, No water protection required, Dust free, Vibration free. Back to top |
|
|
|
|
